Congrevape Ignition RDA
The Ignition RDA is Congrevape’s very latest Rebuildable Dripping Atomizer (RDA) and is its first two post design. Inspired by the muscle car posters that were on their walls as teenage
boys, designers John Grefe & James Steward (CoFounders) went for a distinctly automotive
approach. This RDA is Congrevape’s first major release outside of the Doge lineup. The RDA is
a 22mm industry standard RDA and it sustains the high quality and affordability that
Congrevape and the Doge is known for. It is not a replacement for the Doge 3 RDA, but
meant to help fill out your shelfs with more great Congrevape product.In this release
major improvements have been made to:
1) With dual slot air channels, the Ignition’s proprietary Airflow system allows the user to adjust the airflow to exactly their preference. Laser cut to get a perfect shape one of the
air inlets can be closed completely, while the other can still be adjusted for the perfect
2) The Congrevape Tip System has been used on this model, the same as was featured on
the Catemizer and Dog3. The tip is made out of Ceramic, so it does not get hot, or melt
and vent plastic gases.
3) There is significantly more build space in this model, a 19mm in the inside diameter and
2.3mm from the negative post to the build maximum.
4) 2 post Design. The center post is removable, and can be interchanged between a
stainless steel post. Both styles of center posts are included in the parts kit.
5) The juice well is extremely deep on the Ignition . This helps to prevent overfilling the
RDA, as well as holding more liquid per drip.
IGNITION features a black ceramic tip that is easily removable from the RDA. This tip is the
result of extensive research and design into materials science and mechanical engineering. The
style of seating of the tip uses the new CVTipSys®. This is an open source specification
published by Congrevape for the size and mating type of the tip. The benefit in using the system
is a larger tip than a traditional 510 and the removal of an oring installed on the tip.
The CVTipSys®moves the oring into the female mating edge of the RDA. This allows for tips
to be made from a variety of exotic materials that would not otherwise machine an oring groove
well. The IGNITION ceramic tip only comes in high polish black. It is 11mm inside diameter,
17mm outside diameter, and 10.5mm tall.
The Ignition Top Cap is significantly simplified from other top caps. The airflow has been
designed specifically for center coil builds.
Increased build space has been provided by tight match machining the internal rotating air flow
controler. The increase in build space has gone up to 20mmfrom 17.6mm in Doge V2 which
used a similar system..
Increased air efficiency has been provided by laser cutting the airflow intakes.. The laser cut
intakes, let you reduce airspeeds on one intake, while keeping them low for volume on the
other. . The result in the Ignition is higher air speeds at certain intakes, with a more direct hit
onto the center placed coil. The user will feel this as increased airflow, depending on how they
set the air slots. Air slots can still be closed down to preference by twisting the top cap against
the deck. The Ignition is dual intake only.
The parts kit for IGNITION is generous like other members of the Congrevape family of
products. The positive pin comes in copper and SS and is included.
Remember, the copper used in all Congrevape products is C110 lead free copper. It is the
highest grade safety that we can provide our users. No company can ever provide a completely
risk free environment, but a major tenant of Congrevape designed products is that we research
the best materials to put in our equipment, such as only using certified C110 copper to reduce
exposure to lead, and Ceramic, to reduce exposure to formaldehyde from Delrin.
The Ignition RDA deck is a deep juice well two post RDA. It features Japanese peek insulators,
with 3mm post holes. The new insulator design of the Ignition uses a generous amount of peek
to keep the post from melting into the deck.
In the Ignition we’ve used our standard deck dimensions, so that it should fit with a variety of
other Congrevape caps. The ORing is double oringed, which an additional oring at the top of
the AFC to Barrel Connection.
The Ignition RDA features deep decks, to hold lots of liquid. At 10mm deep, these juice wells
hold tons of liquid.
The airflow of the Ignition has been designed to be controlled using the top cap to twist the AFC
and control the holes. This configuration has allowed us to improve a large number of features
on this release.
● Deeper Juice Well
● Larger build space, 2.5mm more before the coil strikes the outside wall
● Reduced thermal transfer from the coil to the top cap & tip
● Easier alignment of coils while building to match Airflow direction