|CF Battery Technical Specification (For CF Maxx)
Press button 5 times in succession in 2 seconds. The LED will blink 3 times (both blue and orange lights) and the button will illuminate Blue when active and ON.
Repeat this procedure to turn battery OFF.
||Press the LED button and inhale at the same time
|LED Light Indicator
||Blue LED light will display for battery cell voltage of 3.6-4.2V. The Orange LED indicates a voltage less than 3.5V.
||4.2V full power output
||Standard resistance: 0.8ohm - 1.2ohm; 0.3ohm - 5.0ohm are available.
|Low Battery Indication
||The battery Orange indicator light blinks 15 times
|| 4.2V output
|Complete Battery Charge Time
1.Unscrew the battery from the vaping components.
2.Gently screw battery into the USB charger.
3.Plug the USB into the supplied wall charger or computer.
4.The battery will flash 3 times and then turn solid in color (Orange light in 3.3-3.5V, Blue light in 3.6-4.2V).
5.The light on the USB charger will be red when charging.
6.Once fully charged, the USB charger will display a green light, and the LED light on battery will turn off after blinking 20 times.
| Overcharge Protection
||When battery is overcharged (voltage beyond 4.25V), the built-in microchip will automatically stop battery charging.
||When battery cell voltage is less than 3.3V (low battery), the atomizer will remain OFF, and the Orange LED light will blink 15 times.
|Atomizer Short Circuit Protection
||If heating coils are short-circuited while vaping, the LED lights (both colors) blink 3 times, and the battery will default to “sleep mode.”
|Charging Short Circuit Protection
|| If the charger is short-circuited while charging, the battery will default to OFF position, stop charging,
and the LED lights (both colors) will flash 6 times.
||When the temperature is beyond 75 degree celsius, the LED will flash 10 times.
|10 Seconds Function
||When vaping time is beyond 10 seconds,the LED will blinks 10 times, the battery stops output,when the LED finishes blinking, then press the button to inhale again.
| Lock and Unlock Function
|| To lock the battery, press the button 5 times in succession in 2 seconds. The LED lights (both colors) will flash 3 times. Repeat this procedure or recharge to unlock.
Always charge the battery completely before using.
Do not store battery in a hot or humid environment.
Do not drop or puncture battery.
Do not force battery connection to other attachments.
Do not charge the CF battery on another charger - it may damage the battery.
Always keep the battery dry and away from moisture.
Do not dismantle or expose the battery compartment- this will result in malfunction.
If the indicator light displays ON continuously or the product becomes hot - immediately disconnect the battery from the cartridge to break the electrical connection.